Project Testing

Project Testing 

Once the project work is implemented, now it's time to test it's performance. It has to be taken up in exhaustive manner for each module- be it hardware, software or firmware. 

Module-wise Testing 

Each module must be tested for all possible conditions or situations. It is ensured that the module is behaving as per the requirements under all situations. 

Integrated Testing 

Now each module is working as per our requirements. The next step is to interconnect the modules one by one and keep testing the performance. The process continues to all the module are integrated and the overall performance is acceptable.

 Improvements needed? 

At any stage, if the performance is unsatisfactory: 

1. Check up whether there is any flaw in implementation. If so, make necessary corrections and proceed to testing phase again. 

2. If flaws couldn't be found in implementations, then the problem maybe with design. Check up the design once more. Any flaws found, then correct them and forward the new design for implementation. 

3. No problems with design? Then verify the requirements analysis. Correct the problems and submit the corrected analysis new design.

That's the V- model.

Everything is working as per requirements!!! 

Great! You have done it! 

Congratulations 👏👏👏

Check everything once more and get ready to close the project work. Should we? No, we still need to create our report on our project work we are proud upon.